Maintenance Advice - Teamtex FC39ELLXT Manual De Instrucciones

through the openings on the side of the shell and cover of the car seat (26). Pull on the belt
and threaded through the openings on the opposite side of the shell and cover (27). Fasten
the seatbelt (28). On the side nearest the belt winder, pull up the diagonal belt through the
slot located on the side of the shell (29). Make sure the belt is not twisted and pull it as tightly
as possible (30). Check that the diagonal lies across your child's shoulder, clear of their neck.
Reclining your child seat
Push the adjustment lever located under the front of the seat upwards, then pull or push the
base towards or away from you (31).
Storage of the instruction manual
(32)

Maintenance advice

All the material parts can be removed. Slight stains can be removed using a damp sponge
soaked in soapy water or it can be washed by hand at 30° in soapy water. Do not use bleach,
do not iron, do not machine wash, and do not tumble dry.
WARNING
• This car seat is a "Universal" child restraint system. It has been approved in accordance with
regulation N°44/04, and is suitable for general use in vehicles and is compatible with the
majority (some exceptions) of vehicle seats.
• It is more likely that the seat is perfectly compatible if the vehicle manufacturer states that
its vehicles are suitable for taking "Universal" child restraint systems.
• This restraint system is classified as "Universal" in accordance with the strictest approval
criteria, whereas earlier models do not correspond to these new provisions.
• It can only be adapted to vehicles with 3-point safety belts that are either fixed or have a
roller mechanism and that have been approved compliant with the UN/ ECE N° 16 or other
equivalent standards.
• If in doubt, contact the manufacturer or retailer of the restraint system.
33
User guide - EN