Steren CCTV-210 Manual De Usuario página 23

Date Time
Click the Date Time item in the left column to setup time and date
for your camera, providing correct information for the remote
users who might be thousands of miles away from the camera's
location.
- Date & Time: You can set up time and date manually or
automatically by selecting the Synchronized with Time Server
option.
• Synchronized with Time Server: Select this option and
the time will be based on GMT setting. The time will be
synchronized every 10 minutes. When selecting this
option, you have to enter the required information in the
following fi elds:
• Set Manually: Select this option to set the time
manually. The system administrator must enter the date
and time in the respective fi eld manually.
IP Address – Enter the IP Address of the Time
Server in this box.
Protocol – Two options of NTP or Time are
available for your selection to link with the Time
Server. The default setting is NTP.
TimeZone – Select the time zone for the region
from the pull-down menu.
ENGLISH-23