Kreg Jig Manual De Instrucciones página 19

Selecting the Correct Screw
Joining 1" to 1" material
1-1/2" recommended screw length
Joining 1-1/4" to 1-1/4" material
2" recommended screw length
Joining 1-1/2" to 1-1/2" material
2-1/2" recommended screw length
Joining 1-1/8" to 1-1/8" material
1-1/2" recommended screw length
Joining 1-3/8" to 1-3/8" material
2" recommended screw length
Standard Depth Collar Settings
To get the amount of screw penetration shown
in the charts, use the standard depth collar set-
tings below as measured from the shoulder of
the drill bit to the depth collar. These distances
can also be referenced on the base of both the
Benchtop and Portable Base.
Depth collar distance from
Jig Setting shoulder of drill bit
1/2"
5/8"
3/4"
7/8"
1"
1-1/8"
1-1/4"
1-3/8"
1-1/2"
18
3-1/4"
3-7/16"
3-9/16"
3-11/16"
3-7/8"
4-3/16"
4-1/8"
4-5/16"
4-1/8"