User's Manual of Remote Controller
When the indoor unit is connected with fresh air valve, air function setting can
control the connection of fresh air valve, which can control the fresh air volume and
improve the air quality inside the room.
Setting X-FAN function
(8).
In unit on status, press X-FAN button to turn on or turn off X-FAN function.
When
is displayed, X-FAN function is on.
When
is not displayed, X-FAN function is off.
When X-FAN function is on, the water on the evaporator will be blown away after
turning off the unit to avoid mildew.
Setting timer
(9).
You can set the operation time of unit as you need. You can also set timer on and
timer off in combination.
Before setting, check if the time of the system is the same as the current time. If not,
please set the time according to current time.
Setting timer off
Pressing TIMER OFF button, OFF is blinking and time displaying zone
1).
displays the timer time of last setting.
Press ▲ or ▼ button to adjust the timer time.
2).
Press TIMER OFF button again to confirm setting. OFF is displayed and time
3).
displaying zone resumes to display current time.
Press TIMER OFF button again to cancel timer and OFF is not displayed.
Setting timer on
Pressing TIMER ON button, ON is blinking and time displaying zone displays
1).
the timer time of last setting.
Press ▲ or ▼ button to adjust the timer time.
2).
Press TIMER ON button again to confirm setting. ON is displayed and time
3).
displaying zone resumes to display current time.
Press TIMER ON button again to cancel timer and ON is not displayed.
Setting energy-saving function
(10).
If you want to turn on energy-saving function:
When the unit is operating,
1).
Under cool or dry mode,
heating and heat supply modes,
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
will be blinking if SAVE button is pressed.
is displayed. Under heat, floor heating, quick
is displayed and temperature displaying
12