Preparation Before Operation; Introduction Of Operation Function - Gree YAP1F Manual Del Usuario

User's Manual of Remote Controller
No. Button name
1 ON/OFF
2 TURBO
3 MODE
4
5 I FEEL
6 TEMP
7
8 LIGHT
9 X-FAN
10 SLEEP
11 CLOCK
12 TOFF
13 TON
14
15 FAN
16

1.2 Preparation before operation

When using the remote controller for the first time or after replacing the batteries,
please set the time of the system according to current time in the following steps:
Pressing CLOCK button,
(1).
Pressing
(2).
Press CLOCK button again to confirm the time and return to display current
(3).
time.

1.3 Introduction of operation function

Selecting operation mode
(1).
In unit on status, press MODE button to select operation mode in following
sequence:
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Switch temperature displaying type on the unit's display
/
or button, the clock time will increase or decrease rapidly.
Function
Turn on or turn off the unit
Set turbo function
Set operation mode
Set up&down swing status
Set I FEEL function
Set health function and air function
Set light function
Set X-FAN function
Set sleep function
Set clock of the system
Set timer off function
Set timer on function
Set left&right swing status
Set fan speed
Set temperature and time
is blinking.
2