Commissioning; Automatic Mode - AIR8 720i EDGE Manual De Instrucciones

Figure 3: Display indicators

Commissioning

Connecting the device
When you plug in the device, the readiness for operation is signalled visually (lights
turning on, top air outlet cover opening) and acoustically (ringtones).
Caution: Do not plug or unplug the device with wet hands.
Power
The power switch is used to turn the unit "on" and "off".
By default, the device is set on automatic mode.
Mode
1. Manual mode
Adjust the fan speed manually. There are 4 wind speed levels, and the
photocatalyst filter becomes active when the highest wind speed level is activated.

2. Automatic mode

The device automatically adjusts the fan speed from lowest to highest mode
depending on the quality of the air.
3. Intensive mode
In the intensive mode, the device filters the largest air volume possible. The
photocatalyst filter becomes active. It is recommended to use this mode for 10
minutes in order to protect the motor.
7