Filling The Boiler Tank During Use; Cleaning And Maintenance - EuroSteam XVAPOR 1500 Manual De Instrucciones

FILLING DURING USE & CLEANING

Filling the Boiler Tank During Use

If the boiler tank should become empty during use, switch off the unit and unplug
from the wall outlet and proceed as follows:
* press the button (A) to discharge any remaining steam;
* slowly unscrew the boiler tank cap (N), waiting a few seconds for the steam to
finish before unscrewing it completely. Wait a few minutes before adding water to
the boiler tank (M);
* add more water, making sure to pour it in slowly to prevent new bursts of steam
from forming.
We recommend waiting at least 3 minutes from the time of unplugging the appli-
ance before adding more water to the boiler tank;
* firmly screw the boiler tank cap (N) back into place;
* plug the appliance to the power mains;
* press the on switch (L).

Cleaning and Maintenance

* Emptying and cleaning the inside of the boiler tank
* Clean the boiler tank at least once every month so as to remove any scale residues
which might affect the normal operation of the appliance.
* Switch off the appliance, unplug it from the mains power and leave it to cool be-
fore cleaning out the boiler tank, so as to avoid the risk of scalds.
* Bleed out any pressure remaining in the boiler tank (M) using the steam button (A)
on the gun (C), pointing the jet into a suitable container.
* Slowly unscrew the boiler tank cap (N) and remove it completely.
* Slowly add tap water to the boiler tank (M) to prevent any spurts of steam; shake
the appliance and turn it upside down to empty it. Repeat the operation several
times.
* Never add scale removers, vinegar or other perfumed substances to the tank, as
these risk damaging the appliance with immediate cancellation of the warranty.
12
Filling & Cleaning