FILLING DURING USE & CLEANING
* Store the attachments using the apposite compartment (H) situated on the base
of the appliance, then lift the appliance using the rear lever (Fig. 9).
* Take the attachments in the apposite spaces inside the compartment (H) (Fig. 10).
* Position the appliance back on the compartment (H) by inserting the references
on the appliance into the apposite front holes on the compartment first and then
pressing the rear part of the appliance downwards until it locks (11).
* Where appropriate, insert the floor brush (6) with the corresponding adapter (13)
into the relevant hook situated in the rear part of the appliance (12).
TIPS
* To extend the life of your brushes, do not put excessive pressure on the
brush. Let the steam do the work and use the brush to loosen prior to
wiping with a cloth.
* Be sure to store your Eurosteam® XVapor 1500 with the boiler tank
empty and the screw cap off. This will allow the boiler to breathe and
minimize build up.
* Do not over fill your boiler. When over filled only hot water will come
out of the nozzle until the water level is down enough to make steam.
* Always store your steamer away from animals and children, it is not a
toy and may be damaged if used for use other than intended.
13
Filling & Cleaning