Publicidad
Idiomas disponibles
Idiomas disponibles
3. Left and Right Side Panel
- Screw 2 AA screws into each side of the bottom
panel as shown below.
Leave the screw heads protruding
approximately
1/8-inch
above panel surface.
- Insert the holes in each side panel
base over the protruding
screws on each side of the bottom
panel. - Slide
the side panels to the back of bottom
panel. Tighten the screws to secure the side panels in place.
4. Rear Panel
- Screw 2 AA screws into the back of each side panel as shown below.
Leave screw heads protruding
approximately
1/8-inch
above panel surface.
- Slide the 2 notches in each side of the back panel over the protruding
screws so that back panel
base rests
on bottom
panel.
- Tighten the screws to secure the back panel in place.
- Insert and tighten
1 AA screw in the middle
of the back panel base as shown.
\
22
Publicidad
