Publicidad
Idiomas disponibles
Idiomas disponibles
11. Side Burner Tube and Valve
- Remove tie wraps from side burner grid, and remove grid from side burner.
- Insert side burner valve control stem though
side burner control
panel. Attach
bezel to control
panel and
valve control with 2 FF screws.
- Attach
the side burner nozzle support to the underside
of the burner bowl with 2 HH screws and 2 II washers
as shown.
- Run the side burner ignition
wire over the side panel edge and into the cart
- Replace side burner grid. Attach
the side burner tube and valve assembly
as per the below diagram,
fasten it
with two screws. Fix the bezel with 2 screws onto the side burner panel:
\
12. Ignition
Box
Remove
the cap
and
nut from
the ignition
box.
Secure ignition
box to the side panel
with
the nut. Then
reassemble
the cap to the box.
26
Publicidad
