Keep-Warm Function; Delay Function - ARENDO 304779 Manual De Usuario

Sample quantities of rice and water:
The supported quantities of 0.5 - 1.5 measuring cups of rice correspond to a
portion of rice for 1-2 persons. Please fill the supplied measuring cup up to half
with rice, add it to the cooking vessel, and then fill water up to the 0.5 mark
for rice. Likewise, for one full measuring cup of rice, water has to be filled up to
the 1.0 mark for rice in the cooking vessel, or up to the 1.5 mark for rice for 1.5
measuring cups of rice..
6.2 Cooking porridge
Measure the required ingredients for porridge such that the total quantity does
not exceed the 0.5 mark for porridge in the cooking vessel. Now place the cooking
vessel in the rice cooker and close the lid. Connect the power cord to a properly
installed 220-240V AC socket and press the "Porridge" button (16) on the front of
the appliance. The white indicator starts glowing. Allow the porridge to cook for
about 45 minutes and then mix it with the rice spoon (11). The rice cooker auto-
matically changes over to the keep-warm mode once the porridge is ready. If you
want to cancel the keep-warm mode, press the "Keep Warm / Cancel " button (18).
After cooking, remove the power cord from the socket and then remove the lid.
Note: If the porridge needs to be kept warm, then the power cord has to be con-
nected and the lid should be in place. The keep-warm function will be terminated if
the power cord is removed.

6.3 Keep-warm function

The keep-warm function is automatically started after the cooking is completed.
Alternatively, you can start the keep-warm function manually by pressing the
"Keep Warm / Cancel" button (18) . To switch off the keep-warm function, press
the button again or disconnect the power cord from the socket.

6.4 Delay function

The "delay" function allows you to switch on the rice cooker after a defined Timer
(Delay) and to keep the rice ready at a specified time. Press the "Timer" button
(20) to enable the "Delay" function and to delay the cooking process by a time
between 1-24 hours. Pressing the "Timer" button (20) repeatedly increases the
configured time up to a maximum of 24 hours.
25
English