Kemper 6541090 Manual Del Usuario página 13

B) Specification
For outdoor use only.
•
Uses propane or butane gas only.
•
Max wattage: 12,0 kW
•
Min. wattage: 5,0 kW
•
Consumption: 450 g/hr – 870 g/hr
•
Weight: stainless steel model G.W. 19 Kg
•
Powder coating model G.W. 20 Kg
Height: 226,5 cm
•
With certificate
•
Articles of category I3+
•
C) Table of opening
Tools needed
Open end wrench 10 & 13 mm
•
Adjustable opening wrench 8" long
•
Slip joint pliers 9" long.
•
Philips screwdriver w/medium blade
•
Spray bottle of soap solution for leakage test.
•
Parts supplied
Stand (B) with LPG tank housing (C)
•
Assembly post (D) with 3 pcs post brackets (E)
•
10 mm x 86 cm galvanized steel pipe (F)
•
Complete burner (G)
•
6 pcs bolts M8x16 mm (A – 1) for assembly post brackets and stand
•
6 pcs bolts M6x35 mm (A – 2) and 6 pcs nuts M6 (A – 3) for assembly post and post brackets.
•
3 pcs pins for burner (A – 4)
•
Reflector (H) 81 cm with 9 pcs screws, 9 nuts and 9 washers for the reflector's assembly end 9 pcs
•
washers Φ 8 (A – 5) and 3 pcs castle nuts (A – 7) for assembly the reflector on the burner.
0,5 m flexible hose (I). The flexible hose can be with fitted connection (I
•
(I ).
2
4 pcs bolts M6x10 mm (A – 6) for assembly post and burner.
•
3 pcs ground fixer (A – 9)
•
6 pcs bolts M6x10 mm (A – 6), 6 pcs nuts M6 (A – 3) e 6 pcs washers (A – 8) for assembly the
•
ground fixers on the stand.
Hose connector (A – 10) to be used with flexible hose without connection fitted.
•
Pressure regulator with threaded output (L
•
hose connector (L
GAS PRESSURE
28/30 – 37
ASSEMBLY PARTS
) for hose without fitted connection.
2
(mbar)
1,8 mm
) for connected hose or pressure regulator with outlet
1
13/49
MAIN OPENING OF
OPENING PILOT BURNER
0,18 mm
) or without fitted connection
1