NZI Helmets BECOOL 3 El Manual Del Propietario página 4

Congratulations for purchasing this new NZI
product. In order to enjoy the best features of
this helmet, we strongly recommend you to
carefully read this instruction manual.
ADVISE HOW TO USE AND MAINTAIN YOUR
HELMET
Take care of your helmet; it will protect you in
case of crash. This helmet has been finished
with a thin paint coating. Just like any other
painted surface rough handling or careless-
GB
ness when carrying the helmet (like, for ex-
ample, having the helmet fastened together
with the lock) could damage this coating. Do
not modify the main helmet structure. Do not
throw it against the floor, nor expose your
helmet to temperatures higher than 50ºC,
because, besides damaging the paint coating,
the level of protection of your helmet could
decrease. Do not apply paints, self-adhesives,
combustibles or solvents on your helmet, the
degree of protection may diminish.
4
O W N E R S
HELMET SIZE
It is important to choose the correct helmet
size, so that it will protect you adequately in
case of an impact. The helmet size is deter-
mined by the largest perimeter of the skull.
Surround your head with a measure tape, just
above the eyes and ears, and you will obtain
a measure in centimetres. Choose a helmet
that corresponds to this size, and if the hel-
met is too tight, opt for a larger size. Please do
not forget that the helmet interior stretches
when being used. If you hesitate between two
sizes, opt for the tightest one.
PUTTING THE HELMET ON
To put the helmet on correctly, place it onto
your head and fasten the chinstrap without
leaving any clearance between the strap and
the chin. The helmet should be placed on your
head in such a way that it protects both the
forehead and neck (Fig. A). Do not incline the
helmet forwards or backwards (Fig. B & C).
M A N U A L