NZI Helmets CLASS El Manual Del Propietario página 5

CLASS
O W N E R S M A N U A L
VISOR
Instructions for taking care of your visor.
Clean the visor only with water and neutral
soap. To dry the visor it is not necessary to rub;
dabbing will do. We strongly recommend you
to avoid the use of any kind of solvents, alcohol
or abrasive products on the visor. It is recom-
mended to replace the visor when scratches or
marks appear during the use; they can impair
your view.
Replacing the visor.
A. Removing:
4
Remove the lid by pressing the top. Pull the
3
screen from the top rear edge and this will 2
come out of its housing (Fig. 1 ) Do the same on
1
the opposite side.
Fig.1 Fig.2 Fig.3
B. Placing:
Match the item 1 of the visor in open position
[Fig.2] with the item 2 [Fig.3] of the mechanism
as shown in [Fig.4]. Apply light pressure and in-
sert the catch pin of item 3 [Fig.3]. Close the
visor and the item 4 will engage [Fig.3]. Repeat
these steps on the opposite side of the visor.
Fig.4
5