NZI Helmets ACTIVY 3 El Manual Del Propietario página 6

strap without leaving any clearance
between the strap and the chin. The
helmet should be placed on your head
in such a way that it protects both the
forehead and neck (Fig. A). Do not incline
the helmet forwards or backwards (Fig.
B & C).
VISOR
Instructions for taking care of your vi-
sor.
Clean the visor only with water and neu-
GB
tral soap. To dry the visor it is not neces-
sary to rub; dabbing will do. We strongly
recommend you to avoid the use of any
kind of solvents, alcohol or abrasive
products on the visor. It is recommend-
ed to replace the visor when scratches
or marks appear during the use; they
can impair your view.
Replacing the visor.
A. Removing:
Remove the lid by pressing the top. Pull
O W N E R S
the screen from the top rear edge and
this will come out of its housing (Fig. 1 ) Do
the same on the opposite side.
B. Placing:
Match the item 1 of the visor in open
position [Fig.2] with the item 2 [Fig.3] of
the mechanism as shown in [Fig.4]. Apply
light pressure and insert the catch pin
of item 3 [Fig.3]. Close the visor and the
item 4 will engage [Fig.3]. Repeat these
steps on the opposite side of the visor.
CLEANING THE INTERNAL LINING
this helmet is provided with a remov-
able and washable lining. Please wash by
hand with water and mild soap and left
dry, avoiding direct exposure to sunlight.
REFLECTIVE STICKERS
If you want to use your helmet in France,
you must mount the four reflective stick-
ers as described on the packaging in ac-
cordance with the national regulation in
force. (fig. 5)
M A N U A L