yellow jacket 52070F Instrucciones De Operación página 6

VIEW, SAVE, DELETE AND REVIEW THERMAL IMAGES
• Point the thermal imager toward the object or area of interest and
view the thermal image on the display.
• Pull the trigger to capture the image. Press "SAVE" to save the
image to the internal memory. Press "SHARE" to send the image to
a Bluetooth connected smart device.
®
• To review saved images, access the Settings Menu.
• To delete images from the internal memory, access the Settings Menu
and delete the stored images.
WARNING: All images are deleted when the internal memory is erased.
OPERATION
TURN ON THE THERMAL IMAGER
• Press and hold the Power button for greater than 2 seconds to turn
the imager ON.
• The start-up screen will be shown until the shutter resets the image.
• After the startup period, the imager will display a real-time IR thermal
image along with an IR temperature reading.
START-UP SCREEN
TEMPERATURE SCREENING MODE FOR
ELEVATED SKIN TEMPERATURE SCREENING
If the thermal imager is to be used for elevated skin temperature
screening, the Screening Mode in the Measure Menu must be set to ON.
Screening Mode should be set to OFF for all other applications.
1. Press the OK button to enter
2. Access the Measure menu buy
3. Turn ON the "Screening Mode" option
4. If desired, change the Alarm
5. Set the Temperature compensation to
the Settings Menu
pressing the Down Arrow button
on in "Measure" menu.
Temperature.
The Alarm Temperature is defaulted to
99.1°F (37.3°C)