Electrical Safety - Siefken HOLZ MEISTER HM718 Instrucciones De Uso

3 YEARS
L I M I T E D WA R R A N T Y
WARNING: Read all warnings and safety instructions. Failure to follow warnings and instruc-
tions can result in electric shock, re, and / or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your network operated (corded) or cordless
(cordless) power tool.
2. Safety work area
to. Keep the work area clean and well lit. Disorderly or dark areas cause accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases, or dust. Power tools generate sparks that can ignite dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.

3. Electrical safety

to. The power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with grounded power tools. Proper plugs and correct outlets will reduce the risk
of electric shock.
b. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigera-
tors. There is an increased risk of electric shock if your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increa-
se the risk of electric shock.
d. Do not abuse the cable. Never use the cord to carry, pull, or unplug the power tool. Keep the
cord away from heat, oil, sharp edges, or moving parts. Damaged or tangled cables increase
the risk of electric shock.
e. When operating an outdoor power tool, use an extension cord suitable for outdoor use.
Using a suitable cable for outdoor use reduces the risk of electric shock.
F. If running a power tool in a wet location is unavoidable, use a power supply with a residual
current device (RCD). Using an RCD reduces the risk of electric shock. PAGE 4.
NOTE: The term "residual current device" (RCD) may be replaced by the term "ground fault
circuit interrupter" (GFCI) or ground fault circuit breaker (ELCB).
2