How To Assemble Your Light Kit Assembly - Fanimation SCHOLAR LP8343LABA Manual De Instrucciones

How to Assemble Your Light Kit Assembly

1. Remove the three screws in the switch housing
adapter. Retain the screws for Step 3. (Figure 1)
2. Securely attach the 9-pin connector from the motor
assembly to the wire harness socket within the light
fitter assembly. (Figure 2)
3. Assemble the light fitter assembly to the switch
housing adapter using the previously removed
screws and securely tighten all screws. (Figure 3)
4. Remove the glass retainer from the light fitter
assembly and retain the glass retainer for next step.
(Figure 4)
5. Securely attach the glass to light fitter assembly
with the glass retainer by threading the retainer
clockwise into place. (Figure 5)
6. Insert light bulbs into sockets. (Figure 6)
Switch Housing
Adapter
Light Fitter
Assembly
11
Figure 1
Motor Assembly
Figure 2
Switch Housing
Adapter
Light Fitter
Assembly
Figure 3
Figure 4
Light Fitter
Assembly
Glass Retainer
Figure 5
Socket
Figure 6
Light Fitter
Assembly
Glass
Retainer
Glass
Bulb