Axxess AXBUCH-MI6V Instrucciones De Instalación página 2

Installation Instructions for AXBUCH-MI6V

Connections to be made

The AXBUCH-MI6V can be connected two different ways

To retain the factory backup camera to an aftermarket radio:

• Connect the Black wire to chassis ground, and also to the Black wire of the AXCSD-6V.

• Connect the Yellow wire to battery power.

• Connect the Red wire to the Blue/Red wire of the AXCSD-6V.

• Connect the Green/Purple wire to the reverse wire of the aftermarket radio,

and also to the Blue/White wire of the AXCSD-6V.

• Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio.

To allow an aftermarket camera to be added to the OEM screen:

• Connect the Black wire to the ground wire of the aftermarket camera.

• Connect the Yellow wire to battery wire of the aftermarket camera.

• Connect the female Yellow RCA jack to the aftermarket camera.

• The AXCSD-6V 12-volt to 6-volt converter will not be used in this application.

Axxess Integrate

REV. 1/28/20

NOWLEDGE IS

OWER

Enhance your installation and fabrication skills by

enrolling in the most recognized and respected

mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps

toward a better tomorrow.

axxessinterfaces.com • metraonline.com

Metra recommends MECP

certified technicians