Powering On/Off - Anker PowerConf Manual De Usuario

Connecting
a) Connect to your computer by using a USB cable.
b) Connect to your computer or mobile device via
Bluetooth pairing.
Power on this product for the first time, it will automatically enter the
Bluetooth pairing mode.
02 EN
Anker PowerConf
Press Enter Bluetooth pairing mode
Flashes blue Bluetooth pairing
Steady blue Bluetooth connected
• Each time you power on the product, it will automatically connect with
the last successfully connected device if available.
• To disconnect Bluetooth, press the Bluetooth button again.

Powering On/Off

Press and hold the power button for 2 seconds to power on. The status LED
will light on clockwise and then fade out. To power off, press and hold the
power button for 2 seconds.
EN 03