Steren AMP-160 Manual Del Usuario página 3

Verify Line Voltage Before Use
Your new amplifi er has been factory-confi gured for use with
115- volt AC line current. Connecting the amplifi er to a line
voltage other than that for which it is intended can create a
safety and fi re hazard, and may damage the amplifi er.
If you have any questions about the voltage requirements for
your specifi c model, or about the line voltage in your area,
contact your selling dealer before plugging the unit into a wall
outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord supplied with
your unit. If a replacement
cord is used, make certain that it is of a similar gauge. We do not
recommend using extension
cords with this product. As with all electrical devices, do not run
power cords under rugs or carpets or place heavy objects on
power cords.
Damaged power cords should be replaced immediately with
cords meeting factory specifi cations.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC outlet, always
pull the plug; never pull the cord. If you do not intend to use the
amplifi er for a considerable length of time, disconnect the plug
from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside this product.
Opening the cabinet may
present a shock hazard, and any modifi cation to the product will
void your guarantee. If water
enters the unit, or any metal object such as paper clip, wire or
staple accidentally falls inside the cabinet, disconnect the unit
from the AC power source immediately and consult an
authorized warranty station.
ENGLISH-3