Steren AMP-160 Manual Del Usuario página 7

5
5.- Mute LED
Lights on when mute button was
pressed
6.- Volume 6
Use this knob to control the volume
level of the selected channel. If you
turn it to the right, the volume will
raise, if you turn it to the left, the
volume level will decrease.
7.- Zone selector 7
Press the desired buttons to assign
a zone. Whole zones can be
operated at the same time.
8
8.- Phone volume
Set the volume level of the device
plugged to Phone connector.
9.- Phone
9
The amplifi er's audio signal can be
sent to the connected headphones.
10
10 Monitor volume control
This knob allows you to set the
monitor volume output level.
11 Zone 1 volume level 11
Use this knob to control the volume
level of the Zone 1 signal output
12 12 LED VU-metre
Indicates the overall output signal
level
13
13 Monitor selector
Press Monitor, the signal from the
amplifi er 1 will connect to monitor
volume. Press Monitor once again,
and the connection signal will be
cut. Other three buttons are
operated in the same way.
Z1
Z3
8
12
13
ENGLISH-7
5
MUTE
VOL
Z2
Z4
Zone
Selector
Phone Monitor
Volume Volume
Phone
9
ZONE 1
VOLUME
MON
4
6
7
10
11