Publicidad
Idiomas disponibles
Idiomas disponibles
HARDWARE AND TOOLS NEEDED
Assembly: Requires 2 people. Get another person to help. Tools Needed: Pliers,
Phillips Head Screwdriver and a 7/16" Nut Driver.
NOTE: Do Not tighten any bolts unless instructed to do so. Tightening too soon
may prohibit parts from fitting together. All Hex Nuts should be on the inside of the
grill unless stated otherwise. Unpack all contents in a well cleared and padded
area.
Estimated Assembly Time: 45 minutes
3070_OM_A.1
B-4
4
Hardware Pack:
¼-20 x 3/4" HEX BOLT .......................... 1 PCS
¼-20 x 3/4" HEX BOLT WITH THREAD LOCKING
COMPOUND ......................................... 4 PCS
¼-20 x ½" HEX BOLT ............................ 64 PCS
¼" FLAT WASHER ................................ 2 PCS
¼"-20 HEX NUT .................................... 15 PCS
¼" LOCK WASHER .............................. 49 PCS
COTTER PIN ........................................ 2 PCS
3/16" SHEET METAL SCREW .............. 3 PCS
1/8" MACHINE SCREW ........................ 2 PCS
#10-24 x 2/5" SCREW ........................... 6 PCS
UTENSIL HOOK ................................... 3 PCS
Publicidad
