Step 15
Secure the Fascia to the side of the CONTROL PANEL ASSEMBLY using two (2) ¼-20 x ½" HEX BOLTS.
Step 16
Install BURNERS in GAS GRILL BODY, by sliding the burner over the end of the valve and secure them
using three (3) 3/16" BURNER SCREWS, as shown below. Ensure each valve tip goes inside burner
opening. The burner with the longer wire goes on the right side of the GRILL BODY.
3070_OM_A.1
B-14
1/2" Hex Bolt
Burner