Honda Power Products F220 Manual De Explicaciones página 18

7.Transmission oil
Place the tiller on a level surface and remove the two screw bolts from
front cover, and remove the front cover.
1.Remove the transmission oil level check bolt. The oil should be level
with the lower edge of the oil filler hole.
2.Remove the transmission oil filler cap and add the oil as
recommended for the engine, if the level is low.
Recommended oil:
Use SAE 0W-20 Honda 4-stroke oil or SAE 0W-20 4-stroke motor oil
that meets the requirements for API service category SL or
equivalent. Always check the API service label on the oil container to
be sure it includes the letters SL or equivalent.
3.Reinstall oil filler cap and tighten the oil level check bolt securely.
Oil capacity: 0.90 L (0.95 US qt, 0.79 lmp qt)
SCREW BOLTS
TRANSMISSION
OIL LEVEL CHECK BOLT
UPPER LIMIT
(Lower edge of the oil filler hole.)
FRONT COVER
TRANSMISSION OIL FILLER CAP
15