Installing Windows - ASROCK H55M/USB3 Manual Del Usuario

HDMI_SPDIF Cable
(Optional)
A. black end
2.7 2.7 Driver Installation Guide Driver Installation Guide
2.7 2.7 2.7 Driver Installation Guide Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.8 2.8 2.8 2.8 2.8

Installing Windows

Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
Vista Vista Vista 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions 64-bit / XP / XP 64-bit Without RAID Functions
TM TM TM TM TM
If you want to install Windows
on your SATA / SATAII HDDs without RAID functions, please follow below procedures
according to the OS you install.
2.8.1 2.8.1 2.8.1 2.8.1 2.8.1 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Functions Functions
Functions Functions Functions
If you want to install Windows
without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATAII HDDs without NCQ function
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the option "SATA Operation Mode" to [IDE].
STEP 2: Install Windows
2 0 2 0 2 0
2 0 2 0
C
B
A
B. white end (2-pin)
7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista 7 / 7 64-bit / Vista
®
® TM
7 / 7 64-bit / Vista / Vista
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
®
®
XP / XP 64-bit OS on your SATA / SATAII HDDs
Advanced screen
® XP / XP 64-bit OS on your system.
ASRock H55M/USB3 Motherboard
Please connect the black end (A)
of HDMI_SPDIF cable to the
HDMI_SPDIF header on the
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
C. white end (3-pin)
/ / / / /
TM TM TM
TM TM
TM
64-bit / XP / XP 64-bit OS
®
XP / XP 64-bit OS.
Storage Configuration.