Publicidad
Idiomas disponibles
Idiomas disponibles
This means that you can always keep track of the progress. The set temperature is
maintained for 30 minutes by occasional warming. Afterwards, the kettle switches
off automatically.
6. Body LED display on the side/display
• Shows the currently measured temperature and the mode.
• Is automatically deactivated after 5 minutes in sleep mode
(standby).
• Can be deactivated immediately by pressing and holding the "ON/
OFF" button in sleep mode (standby).
• Can be reactivated by pressing any button.
7. Switching the beep sounds on/off
When the display is active (large temperature display is visible), the number of
beeps can be reduced to the legally required minimum by simultaneously press-
ing the "MODE" and "ON/OFF" buttons (beeps for starting and final switch off
are always active). Reactivating is performed by repeatedly and simultaneously
pressing the "MODE" and "ON/OFF" buttons.
8. Descaling and cleaning
It is advisable to descale the kettle at regular intervals depending upon the inten-
sity of use. Before cleaning, pull out the power plug and wait until the appliance
cools down completely. Please use only commercially available descaling agents
based on citric acid to descale the water container. For the appropriate dosage,
please refer to the specifications on the package or insert of the descaling agent.
The heating plate should not be specifically cleaned. Do not use any hard objects
on the heating plate. Use only a damp cloth for cleaning the kettle externally. Do
not use any abrasive items like wire brush or steel sponge for cleaning. Never
use any cleaning agents which may corrode the surface or present a health risk if
consumed! Never immerse the appliance, the power cable or the plug in water or
in any other liquid to prevent risk of electric shock.
English
25
Publicidad
