Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

of the machine, it is now safe to take out the newly created bag.
6. The custom sized bag is now ready for vacuum sealing.
CAUTION: Make sure you give the appliance time to cool down. Wait at least 20 seconds
between seals. Under very heavy usage, appliance will shut off automatically to prevent
overheating. If it does, wait 20 minutes to allow appliance to cool off.
How to Vacuum Seal with the Vacuum Bags
1. Place the item(s) to be sealed into the pre-cut or custom sized bag. Leave at least 2
inches between the contents and the top of the bag to allow for bag contraction.
2. Open lid and place the open end of the bag down into the Vacuum channel.
3. Close lid firmly by pressing down firmly on both sides, check to make sure that the lid
will not open. If the lid can not be lifted, then you have successfully locked the lid in
place.
4. To begin the vacuum process, press the "Vacuum & Seal" button. The unit will
continue to vacuum and then seal once air has been removed.
5. Once the indicator light has turned off, press the release buttons on both sides of the
machine to release the bag.
Care & Cleaning
1. Always unplug the unit before cleaning.
2. Do not immerse in water.
3. Do not use abrasives to clean the unit.
4. Wipe the outer surface with a soft, damp cloth and soap.
5. To clean the inside of the unit, wipe away any food or liquid with a paper towel.
6. Dry all parts thoroughly before you plug in and operate the unit again.
7. Vacuum chamber may trap liquids that were drawn from the bag ; use a mild dish
washing soap and a warm, damp cloth to wipe away any left behind liquid from the
vacuum chamber. Dry thoroughly.
Trouble Shooting
Nothing happens when I press the ''Vacuum & Seal'' button:
Make sure the power cord is correctly plugged into the electrical outlet.
Make sure the power cord is not damaged in any way.
Make sure the electrical outlet is operative by plugging in another appliance. If it's not,
14

Publicidad

Tabla de contenido
loading

Tabla de contenido