Customizing Playback Order (Program Play) - Yamaha MCR-E410 Manual De Instrucciones

Customizing playback order
(Program Play)
You can customize the playback order for 40 tracks stored
in the disc.
STANDBY/ON
1 2
Number
5 6
keys
9 0
PROG
PROG
TIME/INFO
FOLDER/PRESET
1
While the disc is loaded into the CD player,
press PROG.
The PROG indicator lights up and the program
display appears in the CD player's front panel
display.
Program number
2
Use the number keys to enter the track
number you want to program.
Example: To select the track number 8, press 8, and
then wait a few seconds so that 8 is confirmed, or
press 0, and then 8.
The front panel display shows the total number and
total time of the programmed tracks for a few
seconds, and then returns to the program display.
Total number of
programmed tracks
3 4
7 8
DIMMER
FREQ/TEXT
REPEAT
s
PTY SEEK
MODE START
RANDOM
b a
,
h
MENU
PROG.
Track number
Total time of
programmed tracks
PROG.
PROG.
In case of MP3 or WMA disc
Note
The total number of programmed tracks and the total time of
programmed tracks are not displayed for MP3 or WMA disc.
y
The track number for an MP3 or WMA disc is recognized per
disc, not per folder. The number assigned to each track
corresponds to sequence of a disc.
3
Repeat step 2 until you program all desired
tracks.
4
To finish programming tracks, press PROG.
The program display disappears and the playback
information of the first programmed track appears in
the front panel display.
5
To start Program Play, press h.
To clear the program order
While the playback is stopped, press s.
Note
If you open the disc tray or set the CD player to the standby
mode, the programmed order is automatically cleared.
To check or correct the programmed
tracks
1
While the playback is stopped, press PROG.
The program display appears in the CD player's front
panel display.
2
Press b or a to check the program
order.
3
To replace a programmed track with new one,
display the program number to be corrected
in step 2, and then use the number keys to
enter the track number to be programmed.
4
To finish checking or correcting the
programmed tracks, press PROG.
Basic Disc Playback Operations
PROG.
25
En