Using The Second Base Unit; Using Portable Parent's Unit - Safety 1st 48018 Manual Del Propietário

CONNECT TO A TV WITHOUT AUDIO/VIDEO JACKS
Receiver
Base
AUDIO
Audio (red)
1. Plug Audio/Video Cables (red is audio and yellow is video) from Base into COAX converter (not included).
2. Plug other end of COAX converter into television's antenna in jack.
3. Turn on TV to view baby. Unplug COAX Converter to view television program.
CONNECT TO TV WITH AUDIO/VIDEO JACKS AND A VCR
Receiver
Base
AUDIO
Audio (red)
1. Plug Audio/Video Cables (red is audio and yellow is video) from Base into VCR's line in. Plug one end of the second set of cables into
VCR's line out. Plug other end into any available Video Jacks on your television (diagram above shows line 4). Note: Second set of cables
are for use with second Base. If you use them for TV/VCR hook up and also wish to use your Second Base Unit, you will need to purchase
an extra set of Audio/Video cables (not included).
2. Turn on VCR. Switch from Tuner to "Line In". (Refer to VCR Owner's Manual.)
3. Turn on TV. Switch to corresponding Input (Example shows input #1).
Use of COAX converter is required (not included)
VIDEO DC-9V IN
Video (yellow)
*Switch TV to corresponding converter specification
VIDEO DC-9V IN
Video (yellow)
75Ω-Coaxial
Audio R
In
Out
75Ω-Coaxial
Video
Audio
COAX Converter (not included)
75Ω-Coaxial
Line - In Out
Rear of VCR
L
Video
1 2 3 4
Audio R
L
Video
Rear of TV
Rear of TV
Page 9