Error
"
" LED
lights up
Ice cubes are
sticking to each
other
The ice-making
process seems to
run as usual, but
no ice is produced
9. Safety instructions and disclaimer
Please do not try to open the appliance to carry out repairs or modifications by
yourself. Avoid contact with the mains supply. The appliance does not carry current
only when disconnected. Please do not short-circuit the product. Do not forget to
disconnect the power cord when the appliance is not being used or during thun-
derstorms. The appliance is not approved for outdoor use. Please use it only in dry
surroundings. Protect it from high humidity, water and snow. Never expose the
appliance to high outside temperatures. Do not expose the appliance to sudden
changes in temperature or strong vibrations, as this could damage the electronic
components. Check the appliance for any damages before using it. The appliance
should not be used if it has been subject to impact or has been damaged in some
other way. Get in touch with our customer service department in such cases.
Please follow the local regulations and restrictions. Do not use the appliance for
purposes other than those described in this manual. This product is not a toy. Keep
it out of the reach of children or mentally disabled persons. Use the appliance only
with the supplied base plate. Any repairs or modifications to the appliance not
English
Cause
• Ice collector is full
and the light barrier is
blocked
• Light barrier is faulty
• Water temperature is
too low
• Water temperature is
too high
• Ambient temperature
is too high
• Cooling system is not
working
Troubleshooting
• Empty the collector
• Check the light barrier
• Fill the water tank with water
at a temperature of between
8°C and 25°C
• Fill the water tank with water
at a temperature of between
8°C and 25°C
• Make sure that you operate
the appliance only in an am-
bient temperature between
10°C and 32°C
• Please contact our Customer
service department
35