Connections; Chimney Connection - Ravelli HRV 180 PLUS Manual De Uso Y Mantenimiento

Rev.2 04/12/2020
Pag.22
EN
! IMPORTANT

Connections

! IMPORTANT
Connection with external air intake
The stove has been designed for hermetic installations.
To make the connection with an external air intake, proceed as follows:
step action
Connect a 50 mm diameter pipe to the combustion air inlet pipe at the back of the stove. Note: the pipe must be no
1
more than 2 m in length.
The air vent must be installed in such a way that it can not be blocked.

Chimney connection

The chimney must be sized so as to guarantee the draught declared by the Manufacturer.
Electrical connection
The plug of the stove power cable must be connected only after installation and assembly has been completed
of the device, and must remain accessible after installation.
To perform the electrical connection, proceed as follows:
step action
1 Connect the power cord to the back of the stove.
2 Connect the plug of the power cord to the wall socket.
Use and maintenance manual
THE HYDRAULIC CONNECTION PROVIDES EXCLUSIVELY THE PRESENCE OF OUR
CIRCULATOR INTO THE STOVE AT SYSTEM RETURN LINE. REFER TO THE DEDICATED
SECTION TO SEE HOW TO CONNECT EVERY SINGLE MODEL..
The connections must be set up by a technician that is qualified and/or authorised by the
Manufacturer.
HRV 180 PLUS