omi ED 18 Manual De Uso Y Mantenimiento página 16

INTRODUCTION
This manual is an integral part of the dryer you bought, and must remain with the machine even if this will be resold.
It is strictly recommended that the qualified*personnel for installation maintenance and/or control will fully comply with
the contents of this manual and the prevention and safety rules in force in the country where the system will be used. In
this way, not only the usage of the machine will be rational, but also the service will result cost effective.
In case your dryer will present any kind of problem, please contact immediately a Service Centre Authorised by the
manufacturer.
Please note that, when necessary, the use of original spare parts will ensure efficiency and long duration to your dryer.
Due to the continuous technological evolution, the Manufacturer reserves the right to modify the specifications
contained in this manual without giving previous notice.
WARRANTY
Each product is delivered regularly tested, and covered by the warranty conditions specified on the sale list and/or on
the supply contract.
SYMBOLS USED IN THE MANUAL AND ON THE DRYER
* Personnel owning technical knowledge and being enough aware of rules and laws to ensure the needed safety during installation, maintenance and/or
control operations.
Cod. 710.0138.01.00 Rev1A – 04.2008
Read the Use and Maintenance manual before attempt to start up the machine and to perform
any service operation on the dryer.
Pay particular attention to the indications preceded by these symbols.
Installation, maintenance, and/or control operations preceded by these symbols must be
performed exclusively by qualified personnel*.
Pay particular attention to components or systems under pressure.
Pay particular attention to hot surfaces.
Pay particular attention to the risk of electric shock.
Air inlet point.
Air outlet point.
Condensate drain point.
Rotation direction of the fan.
Attention : Before performing any maintenance operation on this machine, do not forget to
disconnect the electric supply, to completely discharge air pressure, and to refer to
the Use and Maintenance manual
ENGLISH
12 - 76