Set Up Requirements; What'S In The Box; What You Need - Angelcare AC027 Manual Del Propietário

SET UP REQUIREMENTS

WHAT'S IN THE BOX

Nursery Unit
1
2 x 1.5V AAA batteries (for Nursery Unit)
2
Stand (for Nursery Unit)
3
Sensor Pad
4
CR2450 3V Battery
5
(for Sensor Pad)

WHAT YOU NEED

• Hardboard, if the crib does not
have a firm surface
(see 'IMPORTANT' note - Step 1)
• Posidrive screwdriver
1- SETTING UP THE SENSOR PAD
The Sensor Pad is designed to detect subtle baby movements on the surface of the
mattress.The alarm will only sound if NO movement is detected for 20 seconds.
3
4
1
4
1
2
Correct positioning
for slatted base
3
2
2x
1. Use a coin to remove/
replace the battery cover
and insert the battery face
with + face up
2. Replace the battery cover,
align 2 dots and click
to secure
3. Remove the mattress from
the crib, place Sensor Pad
- Angelcare® logo side
up - on base in approximate
centre of mattress. It should
be centred on the hardboard
if your crib requires a
hardboard support (see
'IMPORTANT' note below)
4. Replace the mattress
5