External Enable Input Functionality - VESTEL EVC04 Serie Guia De Instalacion

2.6.2 - EXTERNAL ENABLE INPUT FUNCTIONALITY

Your charging station has external potential free enable / disable functionality which can be used
for integration of your charging station to an carpark automation systems, energy supplier ripple
control devices, time switches, photovoltaic inverters, auxiliary load control switches, external
key lock switches etc. DIP switch position 2 is used for enabling and disabling this functionality.
EVSE
CN2
If the external relaxy (RL) is in conducting state (closed), the charging station will not be not be
able to charge the electric vehicle.
You can connect potential free input signals as shown in above circuitry (see figure-17). See section
2.6.1-Data Cable Connection.
IG v7.3.0 2020
SW1
2
1
© 2020 Vestel - All rights reserved
Enabled
ON
1
Disabled
Figure-16
2
3
Figure-17
2
1
Carpark
Automantion
System
RL
Control
4
English - 26