Maintenance
WARNING: Disconnect power
and heater has cooled before
attempting any maintenance or
cleaning to reduce the risk of
fire, electric shock or damage
to persons.
!
NOTE: The fireplace
should not be operated with
an accumulation of dust or dirt
on or in the unit, as this can
cause a build up of heat and
eventual damage. For this reason
the heater must be inspected
regularly, depending upon
conditions and at least at yearly
intervals.
Light Bulb Replacement
Light bulbs need to be replaced
when you notice a dark section
of the flame or when the clarity
and detail of the log exterior
disappears. There are four bulbs
under the log set which generate
the flames and embers.
Helpful Hints: It is a good idea to
replace all light bulbs at one time
if they are close to the end of their
rated life. Group replacement will
reduce the number of times you
need to open the unit to replace
light bulbs. Long life bulbs are
recommended to reduce the
frequency of bulb changes.
8
Light Bulb Requirements:
Quantity of 4 clear chandelier
or candelabra bulbs with an
E-12 (small) socket base, 60
Watt rating. Example: GE 60BC
or Philips 60CTC. DO NOT
EXCEED 60 WATTS PER BULB.
CAUTION: When handling log
only apply force to the ember
bed section not directly to the
logs.
To access the light bulb area
CAUTION:
minutes for light bulbs to cool
off before touching bulbs to
avoid accidental burning of
skin.
1. Open steel curtain (remove
glass doors if applicable).
2. Remove two screws on log
bracket and set aside
(Figure 2)
Figure 2
Allow at least 5
Screws
www.empirecomfort.com