EN
WARNING! Ensure the straps are not twisted.
The harness buckle must be fastened correctly and
the straps should fit the child snugly
MAINTENANCE
Fitting / removing the cover
The cover of the B12 seat is very easy to remove .
There are 2 fastening points for the cover on the
front. Simply unfasten these points and then gently
pull the front part of the cover.
On the sides of the seat there are some plastic parts
that are used to fasten the cover. Simply pull these
gently to remove the cover.
To put the cover back on again just follow the same
process in reverse. Fit the parts into the slots for the
sides.
34
Cleaning
The cover can be machine washed using mild
detergent and at a maximum temperature of 30ºC
Please see the washing instructions on the care label
of the cover.
Do not tumble dry as this could cause the padding to
come away from the fabric.
Do not expose the upholstery to sunlight for prolon-
ged periods, when the seat is not in use cover it up or
store it in the vehicle boot.
The plastic parts can be cleaned with a damp cloth
and neutral detergent.