Publicidad
Idiomas disponibles
Idiomas disponibles
Step 4
Series Row Mounting Instructions
Skip to Step 6 for stand alone fixtures. First fixture in row
●
●
must be mounted at end of row for series mounting.
Interlock alignment holes & studs on end plates & mount
●
●
fixture to T-grid as in Step 2.
Mount one fixture after another until other end of row is
●
●
reached.
T-Grid Ceiling
Mounting Screws (by others)
Step 6
Stand Alone 0r End 0f Row Fixture Instructions
On "open end" end plates, install (1) .875 Plug (D), (1) .156 Plug (E), (1) Acorn Nut (F) and (1) Lockwasher (G) as shown.
●
●
On "conduit end" end plates, install 1/2" conduit fitting and locknut as shown. See Step 7 for optional "Top Access" .
●
●
Open - End
End Plate
(D)
(G)
Housing (A)
(F)
(E)
Alignment Stud
1st Fixture at End of
Fixture
Alignment
Hole
End Plates
Next Fixture
in Row
Bracket Support
IS-083
Step 5
Slide bracket supports away from end plates.
●
●
Install Bushing (H) by snapping it into the access hole in
●
●
end plates of fixtures butted end to end only.
Optional– Install (1) Acorn Nut (F) and (1) Lockwasher (G)
●
●
on each alignment stud.
Bracket
Support
.875 Bushing (H)
Acorn Nut (F)
Lockwasher (G)
Alignment Studs
Bracket Support
Housing (A)
Installation Instructions – CFA
ADC140279
www.cooperlighting.com
Installation Instructions – CFA
End Plates
Access Hole
Bracket
Support
Lockwasher (G)
Acorn Nut (F)
Conduit – End
Housing (A)
(G)
(E)
Lock Nut
(F)
(by others)
End Plate
1/2" Conduit
Fitting (by
others)
3
Publicidad
