For Bathroom Use - Empire EBL50 El Manual Del Propietario

Fireplace Installation
hardwire bracket with provided
grounding screw. Place wire in
between screw and lock washer
and tighten.
10. Carefully reinsert partially
reflective glass into the fireplace
and anchor in place using glass
brackets and screws removed in
step 1.
11. Proceed to installation using the
desired mounting method.
Figure 6
Cord
Bracket
screw
Neutral wires
Figure 7

For Bathroom Use

If this unit is installed in a bathroom, it
must be protected by a GFI receptacle
or circuit. If receptacle is used, it must
be readily accessible.
This electrical appliance is not
watertight. To prevent electrical shock,
it must be installed as to prevent
water from entering unit. This must
be installed away from showers, tubs,
etc. Never locate fireplace where it
may fall into a bathtub or other water
container.
Black live
wires
Wires to
controls
Wire
connectors
Hole for
Ground Screw
11