Metz SCA 3202-M7 Manual Del Usuario página 9

Switch :
Operating mode selector:
NORM position: Dedicated flash mode
SL position: Slave flash mode
Display in dedicated flash mode:
• In dedicated flash mode the display
green if the flash mode TTL, Automatic A or
Manual M set on the flash unit is supported.
With some camera/flash unit combinations there
are limitations regarding TTL flash mode. The
display
Section 3.1).
If the master flash function (controller) is activa-
ted on the flash unit in TTL mode, then the dis-
play of the SCA adapter will start to flash as
a warning (see Section 5).
• With some flash units (45 CL–4 and 60 CT4) auto
working aperture setting on the flash unit by the
camera is not possible for technical reasons. This
means that the camera modes program P and
shutter priority S are not supported in the auto
flash mode A and the manual flash mode M (see
Table 2). The display
warning in the camera modes P and S.
Display in slave flash mode:
• The display
if the flash modes Auto A or Manual M are set on
the flash unit.
• The display
warning when the TTL flash mode has been set
on the flash unit (see Section 6).
flashes in green as a warning (see
lights in red when in slave mode
flashes in red in slave mode as a
flashes in green as a
lights in
9