COMFORT-AIRE RG Serie El Manual Del Propietario página 27

Owner's Manual - RG/RADS Series
AIR CONDITIONER FEATURES
Fresh Air Vent Control
(on 15~18K models
Fig. A
(VENT CLOSED)
The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air - Vent Closed (See Fig.A)
2. Draw fresh air into the room- Vent Open (see Fig.B)
3. Exchange air from the room and draws fresh air into the room - Vent and Exhaust Open (see Fig.C)
TEMPERATURE
COOLING
TEMPERATURE
5
4
3
2
1
7
MIN MAX
COOL COOL
OFF
LO
LO
COOL
FAN
MED
FAN
HI HI
FAN COOL
COOLING
):
Fig. B
(VENT OPEN)
MECHANICAL CONTROL OPERATING INSTRUCTIONS
NOTE:
The controls featured in this manual are representative of many available models.
Your model may offer slightly different features.
Cool Mode
The desired cool setting is selected by rotating the knob to the right to the
appropriate location.
HI COOL has maximum cooling effect and airflow.
LO COOL has minimum cooling effect and airflow.
MED COOL has the intermediate cooling effect and airflow(on some models).
OFF will completely shut off the unit.
NOTE: If your unit is equipped with a vent handle, keep it closed for
maximum efficiency.
Fan Mode
Rotate the knob to the left to select your choice of fan speeds for air circulation.
NOTE: When selecting a fan speed, the compressor will not run. On models with a
vent control, this mode can be used to remove stale air from the room, or to draw
fresh air into the room.Check the section Fresh Air Vent Control.
Thermostat
The thermostat is u sed t o s et t he d esired r oom t emperature when the unit is being
6
operated in the COOL MODE.
To set the desired room temperature, rotate the thermostat switch to the desired
setting. After the set temperature is achieved the thermostat will automatically start
and stop the compressor in order to maintain the desired set temperature.
Rotate the thermostat selector clockwise for higher cool settings. Higher cool settings
will provide lower room temperature. Rotate the thermostat selector counter clockwise
for lower cool settings. Lower cool settings will provide higher room temperature.
MED
COOL
Fig. C
(VENT & EXHAUST
OPEN)
25