Delivery Scope - Brita PURITY Quell ST Manual

ing conditions outlined in the Technical Data chapter are adhered to. They must always be replaced
after a maximum of ten years. The hoses must be replaced in rotation after a maximum of five years.
• Production date:
Production code sticker filter cartridge and box, example: B615002010
6
15
002
010
Production code sticker connector head - Example: 1001801 E 619316008764
1001801
E
6
19
3
16
008764
Production date pressure vessel and pressure vessel lid – example: 1115
11
15
3.5 Safety Assembly Instructions
•
The terminal device operated with the filter must be free of limescale prior to installation.
•
The filter system can also be operated downstream of water softening systems.
•
Protect the filter system from sunlight and mechanical damage. Do not assemble near sources
of heat and open flames.
•
A stop valve must be installed before the filter system intake hose.
•
If the water pressure is higher than 6.9 bar or if there are statutory requirements, a pressure
reducer must be installed before the filter system.
•
A non-return valve according to DIN EN 13959 tested by the DVGW has been factory installed
at the water intake of the filter head.
•
When choosing the material for parts that come into contact with water after the BRITA filter
system, it is important to remember that, due to the process, decarbonised water contains
free carbon dioxide. For this reason, only materials that are compatible with free carbon dioxide
must be used. We recommend the use of BRITA hoses.
•
All parts must be installed in accordance with the country-specific guidelines on the installation
of drinking water facilities.
4 Installation
Caution: Prior to installation, read the Technical Data (Chapter 12) and the Operating and Safety
!
Information (Chapter 3). After the product has been stored and transported at temperatures below
0°C, it must be stored with the original packaging open for at least 24 hours before commissioning.

4.1 Delivery Scope

To install a PURITY Quell new filter, you need a pressure vessel
vessel lid .
3
Before installing, remove everything included in the delivery from the packaging and check that
everything is present:
1 x Pressure Vessel
1
1 x Pressure Vessel Lid
1 x Filter Cartridge
2
1 x Manual
1 x Carbonate hardness test or total hardness test
If anything is missing, please contact your local BRITA Office.
Production year, here: 2016
Production week, here: calendar week 15
Batch No. Filter medium, here the second batch filled in terms of quantity
Serial number of the filter cartridge, here the tenth cartridge from the second batch
BRITA identification number
Supplier ID
Production year, here: 2016
Production week, here: calendar week 19
Production day from Monday (1) to Friday (5), here: Wednesday
Production year, here: 2016
Serial identification number
Production month, here: November
Production year, here: 2015
3
, filter cartridge and pressure
1 2
EN
21