Error Messages
MD-MT180H
ENGLISH
ERROR MES-
SAGES
BATT EMPTY
The battery has run down.
BLANK MD
Nothing is recorded.
(Replace the disc with a recorded disc.)
Can't COPY
You tried to record from a copy prohib-
ited MiniDisc.
(Record using the analogue cable.)
You tried to record signals other than
music (such as data).
Can't EDIT
A track cannot be edited.
(Change the stop position of the track and
then edit it.)
Can't PLAY
You tried to play back a track that can-
not be played with this equipment.
The disc data cannot be read because
Can't READ (*)
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
Can't REC
Recording cannot be performed cor-
rectly due to vibration or shock.
E-37
MEANING
ERROR MES-
SAGES
Can'tSTAMP
Can'tWRITE
DEFECT!
DISC FULL
Er-MD (**)
HOLD
LOCKED
NO DISC
Number or symbol appears in (*) position.
MEANING
Stamp function does not work.
(Check the number of tracks.)
Cannot save the TOC information cor-
rectly to a MiniDisc.
The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
The disc is out of recording space.
The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
The unit is in the hold mode.
You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
A disc has not been loaded.
01/10/5
180H_E_6.fm