Installation - Urmet 1784 Manual De Instalación Y De Uso

4. INSTALLATION

1. Undo the closing screw of the device using the screwdriver insert provided.
2. Open the device as shown.
3. Fix the panel to the wall following the installation instructions.
Refer to the booklet provided with the device for information on panel installation.
Position the centring template (A), provided with the ILA and proximity key reader module, under the
panel and then arrange the base of the ILA and proximity key reader module (1) by the side and mark the
fi xing points B of the anchor bolts (2).
The device Ref. 1784/45 must be installed immediately underneath the door unit because the
length of the wire will not allow it to be positioned elsewhere.
4. Drills the holes and fi x the base to the wall with the screws and anchor bolts included with the product,
establish the connections and confi gure the device.
5. Close the metal lid of the module.
3
1
DS1784-005
1
A
1
2
B
2
4
A
2
B
1
2
5
2
1
17