Indoor Cycling LIVESTRONG E-Serie Manual De Instrucciones página 10

PZ 2
1
2
1
The use of rechargable batteries may lead to male function of the computer and transmitter
units due to a voltage lesser than 1,5V
Version 1.2 2010 EBLS Copyright by Indoorcycling Group GmbH 2010
CHANNEL SETTING & BATTERIE INSTALLATION
hand tight
The channel transmitting the cadence signal
from the transmitter to the computer console is
pre set. A sticker on the housing indicates the
1
preset channel on computer & transmitter.
The channel can manually be changed. To
avoid cross reading please assure a clearance
of 52`` (1,3m) between components set on
identical channels or simply swap to another
channel.
default setting
To assure that the digital cadence signal is
synchronized, please assure that the channel
setting on the computer console corresponds
with the setting of the cadence transmitter on
the front fork.
2
Please view picture no. 2 and 3.
|
www.indoorcycling.com ENG 10