Kit Assembly - Metra 99-7631B Instrucciones De Instalación

1. Attach the radio brackets to the
radio trim panel using the
(4) #8 x 3/8" Phillips screws
provided. (Figure A)
2. Slide the "white" climate
control module removed in dash
disassembly into the lower portion
of the bracket/panel assembly,
and then secure with the factory
hardware. (Figure B)
3. Secure the pocket to the bracket/
panel assembly using the
(4) #8 x 3/8" Phillips screws
provided. (Figure C)
4. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.

Kit Assembly

(Figure A)
(Figure B)
99-7631B
5. Slide the radio into the completed
assembly, and then secure it to the
assembly using the screws supplied
with the radio. (Figure D)
6. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
7. Reassemble the dash in reverse
order of disassembly.
6
(Figure C)
(Figure D)