Yakima LiftTicket 4 Manual De Instrucciones página 2

Place ski mount onto SnapArounds.
Slide ski mount to the outside of the tower
while you are installing the first bolt.
Slide a bolt into the
round hole.
1032628B-2/9
Open ski mount.
Turn clockwise and engage
Slide ski mount into place
the nut.
on the crossbar. Tighten
using the Allen wrench
until the ski mount does not
rotate in the bar.
PULL FIRMLY up
on the ends to be
sure the Lift
Ticket is
completely
closed.
Push a nut into the square hole
nearest the hinged end.
®
Install SKS Locks
(purchased separately).
Place a nut in the square hole
closest to the opening of the ski
mount.
Slide a bolt into the round hole.
Turn clockwise and engage the
nut.
Tighten firmly using the Allen
wrench .
If your bindings touch car roof,
install SkiLift (steps 9,10).
If not, check your installation
carefully and have fun!