APPLICATION OF THE BURNER TO BOILER for mod. COMIST 180
APPLICATION OF THE BURNER TO BOILER for mod. COMIST 250 - 300
REMARKS
When tightening the flange, it is important to do it evenly so that the inner faces are parallel between
them. Since the locking system is highly efficient, do not tighten the nuts too much.
During this operation (tightening of the flange locking nuts) keep the body of the burner lifted so that the
combustion head is kept in a horizontal position.
1 - Boiler plate
2 - Insulating gasket
3 - Burner fixing flange
4 - Stud bolt
5 - Locking nut with washer
6 - Burner flange fixing screw
1 - Boiler plate
2 - Insulating gasket
3 - Burner fixing flange
4 - Stud bolt
5 - Locking nut with washer
37