Power On/Off; Video Recording - Wiseup CUP200 Manual Del Usuario

-1× Spy Camera Water Bottle
-1× 16GB Micro SDHC Class 10 SD Card (fitted into the Micro SD card slot already)
-1× USB Cable
-1× DC5V 1A Power Adapter
-10× Stickers
III. Operation
>> Please make sure your camera is fully charged before using.
>> Please make sure the Micro SD card has been formatted already and is securely fitted into
the camera's SD card slot, or it will not work. We recommend you use a SDHC Class 10 Micro
SD card.
[Note]:
If no Micro SD card is fitted into the camera and you try to power on the camera, the camera
will flash 4 times quickly and shut down automatically.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 2 seconds. The blue indicator
light will come on, flash once and remain solid, indicating the camera has entered into standby
mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 2 seconds again in standby
mode. The blue indicator light will turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 2 seconds. The blue indicator
light will come on, flash once and remain solid, indicating the camera has entered into standby
mode automatically.
3.2.2. Press the Power Button once to start recording video. The blue indicator light will flash 3
times and turn off.
3.2.3. Press the Power Button once again to stop recording video. The blue indicator light will
come on and remain solid, indicating the camera is back to standby mode.
[Note]:
1). A video clip will be generated and saved every 10 minutes automatically.
2). The camera can record video for 110 minutes continuously on a full charge.
3). Video Resolution: 1920x1080P
4). Each video clip takes up about 1.5GB storage space of the Micro SD card.
5). If the micro SD card fills up during the recording process, the camera will stop recording and go back
Video Format: AVI