Power On/Off; Video Recording - Wiseup PBC500 Guia Del Usuario

fitted into the camera's SD card slot, or it will not work. A SDHC Class 10 Micro SD
card is recommended. If no Micro SD card is fitted into the camera or the SD card
cannot be read, the indicator lights will flash red and blue for 10 seconds, and the
camera will shut down automatically.

3.1. POWER ON/OFF

3.1.1. Power on the camera by pressing the Power Button for 3 seconds. The indica-
tor lights will flash red once and then glow solid red, indicating the camera has en-
tered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 5 seconds. The indica-
tor lights will flash red 3 times and illuminate blue for 2 seconds, then turn off.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.

3.2. VIDEO RECORDING

3.2.1. Power on the camera by pressing the Power Button for 3 seconds. The indica-
tor lights will flash red once and then glow solid red, indicating the camera has en-
tered into standby mode automatically.
3.2.2. Press the Power Button for 2 seconds to record video. The indicator lights will
flash red 3 times and then turn off.
3.2.3. Press the Power Button for 2 seconds again to stop recording video. The indi-
cator lights will flash red and blue alternately 3 times, and then they will be solid red,
indicating the camera is back to standby mode.
[Notes]:
1). A video file will be generated and saved every 20 minutes automatically.
2). The camera can record video for 4.5 hours continuously on a full charge.
3). Video Resolution: 1920×1080P Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Power on the camera by pressing the Power Button for 3 seconds. The indica-
tor lights will flash red once and then glow solid red, indicating the camera has en-
tered into standby mode automatically.
3.3.2. Press the Power Button once to take a photo. The indicator lights will flash red
once and then glow solid red, indicating the camera is back to standby mode.
3.4. IR NIGHT VISION FUNCTION